VISCOSITY OIL(MFR); MITCO SERVICES CO. (VENDOR) -- IH HY TRAN FLUID B-6  -- 9150-01-064-9554
<pre>=====================  Product Identification  =====================

Product ID:IH HY TRAN FLUID B-6
MSDS Date:01/01/1987
FSC:9150
NIIN:01-064-9554
=== Responsible Party ===
Company Name:VISCOSITY OIL(MFR); MITCO SERVICES CO. (VENDOR)
Emergency Phone Num:312-847-0224
CAGE:MO801
=== Contractor Identification ===
Company Name:VISCOSITY OIL CO
Address:3200 S WESTERN AVE
Box:City:CHICAGO
State:IL
ZIP:60608-6003
Country:US
Phone:312-847-0224
CAGE:7P852
Company Name:VISCOSITY OIL(MFR); MITCO SERVICES CO. (VENDOR)
CAGE:MO801

=============  Composition/Information on Ingredients  =============

Ingred Name:PETROLEUM OIL (80-90%) TLV AS OIL MIST
Fraction by Wt: 85.0%
ACGIH TLV:5MG/CUM(OILMIST

Ingred Name:TRI-ARYL PHOSPHATE ESTER (LD50 IN RATS >10GM/KG)
ACGIH TLV:NOT SPECIFIED

=====================  Hazards Identification  =====================

Effects of Overexposure:EYES:MODERATE IRRITATION SKIN:IRRITATION ON
    PROLNGD CONTACT.INHAL:IRRITATION OF UPPER RESPIRATY TRAC

=======================  First Aid Measures  =======================

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
    NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
    GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
    SYMPTOMS OF OVEREXPOSURE.

=====================  Fire Fighting Measures  =====================

Flash Point:385F/196C (COC)
Extinguishing Media:WATER FOG,CHEMICAL FOAM,DRY CHEMICAL,CO*2
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA WITH FULL
    PROTECTION.
Unusual Fire/Explosion Hazard:NONE NOTED

==================  Accidental Release Measures  ==================

Spill Release Procedures:CLEAN UP USING AN OIL ABSORBENT. NO UNUSUAL
    HAZARD.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL,DRY AND WELL VENTILATED
    AREA.KEEP CONTAINER CLOSED WHEN NOT IN USE.
Other Precautions:AVOID CONTACT WITH SKIN AND EYES;DO NOT BREATHE
    VAPORS.WASH THOROUGHLY AFTER EACH USE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR OIL
    MIST/VAPORS.
Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
    PROLONGED CONTACT.
Supplemental Safety and Health
MSDS DATED DEC 12,1985

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:WIDE RANGE
Vapor Pres:<.1
Vapor Density:>12.
Spec Gravity:0.9
Evaporation Rate &amp; Reference:(E.ETHER-1) V.SLOW
Solubility in Water:0.03
Appearance and Odor:DARK FLUID,CHARACTERISTIC PETROLEUM ODOR
Percent Volatiles by Volume:NIL

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:MFR CITES NONE
Hazardous Decomposition Products:CO, TRACES OF PHOSPHORUS, OXIDES OF
    SULFUR & ASPHYXIANTS.
Conditions to Avoid Polymerization:WILL NOT POLYMERIZE

====================  Disposal Considerations  ====================

Waste Disposal Methods:AS REQUIRED BY FEDERAL , STATE, & LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.